DABPRESS Vortice Motorized Pollen Tumbler - 150g Acrylic Housing & 120g Aluminum Housing Extractors
You Save: $80.00 (16%)
PRODUCT NOTICE:
DABPRESS VORTICE SERIES MOTORIZED POLLEN TUMBLER
Brushless Variable Speed Motor | Quick-Swap Nylon Sifters | 150g Acrylic Housing & 120g Aluminum Housing
The Vortice Advantage: Precision Separation with Modular Flexibility
The DABPRESS Vortice Series is your ultimate partner for high-efficiency dry sifting. Engineered for extractors who demand professional results without the complexity of traditional methods, the Vortice lineup features a rugged build and a modular drum system. Choose between the classic Vortice 120 (PT01) featuring a rugged aluminum housing, or the upgraded Vortice 150 (PT02Y) featuring an extended thick acrylic housing for complete 360-degree visibility and higher throughput.
Model Selection Guide:
- Vortice 120 (PT01): Features a rugged anodized aluminum housing with a 120g capacity drum (6.26" x 8.66"). Built for solid, traditional durability. (Cold Use Note: While generally not recommended to place motorized tumblers in freezers, if you choose to chill the PT01, you must ensure the motor is 100% dry and completely free of water or condensation before powering on. Do not power on while wet; using a hair dryer to accelerate drying is strongly recommended.)
- Vortice 150 (PT02Y): Upgraded with an extended thick acrylic housing (6.26" x 11.34") and a massive 150g capacity, offering full 360-degree visibility of the tumbling process. (Cold Use Note: Never place the PT02Y into a freezer; only the removable acrylic drum can be chilled.)
⚠️ Critical Notice for Cold Environment & Freezer Use
Important Rule for PT02Y: The PT02Y (Acrylic Model) must never be placed into a freezer. Only the removable acrylic drum can be chilled.
Guidelines for PT01 (Aluminum Model): While we generally do not recommend placing motorized tumblers into the freezer, if you choose to put the PT01 in the freezer, you must strictly follow these rules:
- Ensure Complete Dryness Before Powering: After taking the PT01 out of the freezer, you must guarantee that the motor and all components are 100% completely dry with zero moisture. Do not plug in or power on the unit during this moisture-clearing process. Only after it is completely dry can you power it on or return it to use.
- Use a Hair Dryer to Accelerate Drying: We strongly recommend using a hair dryer on a cool/warm setting to help the motor and housing dry rapidly and safely for convenient use.
- Strict Safety Rule: Under no circumstances is the unit allowed to be powered on or operated before the motor is completely dry.
Product Highlights & Core Features
- Complete Professional Sifter Kit: Includes a full set of 6 user-replaceable nylon sifters (2 pieces each of 120µ, 160µ, and 220µ). Easily swap screens in minutes to refine your batch across multi-stage micron grades. Tip: Always ensure nylon sifters are kept properly taut during installation to maximize aperture opening and boost total resin yield.
- Brushless DC Variable Speed Drive: Driven by a durable 24V Brushless Motor with precise speed control (9V-24V). Fine-tune the rotation speed to match the moisture and fragility of your botanical material.
- Anti-Clog "Gravity Ball" Technology: Comes complete with 5 specialized anti-static plastic balls designed to be placed directly into the drum alongside your material. As the barrel rotates, these balls provide gentle impacts that prevent mesh blinding and ensure 100% sifting efficiency. Tip: Users can also choose alternative small balls of appropriate weight to suit their preference, helping prevent material from sticking to the sifter through gentle tumbling impact.
- Flexible Housing Options: Choose between the classic Anodized Aluminum Housing on the Vortice 120 or the 360-degree transparent Thick Acrylic Housing on the Vortice 150.
- Scalable Capacity: Select from 120g or 150g per cycle depending on your production scale.
- Easy-Clean Architecture: Every part of the Vortice series is easily accessible. The high-quality nylon sifters can be washed and reused for a hygienic, contaminant-free workflow.
Expert Advice: Maximizing Your Trichome Yield
To achieve connoisseur-grade results with your Vortice tumbler, follow these professional guidelines:
- The "Deep Freeze" Method: Freeze your plant material inside the removable drum for 2-4 hours before tumbling. Cold material becomes brittle, allowing trichomes to snap off effortlessly without breaking down plant fiber.
- Speed Modulation: Start at a lower speed (9V-12V) for the first 5 minutes to capture the "Prime" grade. Increase the voltage gradually to dislodge deeper resins without over-agitation.
- Strategic Micron Grading: Use the 220u for an initial "work" run, then refine the results using the 160u or 120u screens for ultimate purity.
Watch & Learn: Vortice Series in Action
Technical Specifications Comparison
| Spec Item | Vortice 120 (PT01) | Vortice 150 (PT02Y) |
|---|---|---|
| Housing Material | Anodized 6061 Aluminum Housing | Thick Acrylic Housing |
| Freezer / Cold Use Rule | Can be used if strict drying rules are followed (No power while wet) | Never place into freezer (Only acrylic drum can be chilled) |
| Motor Type | Brushless DC (Variable Speed 9-24V) | |
| Micron Sifters & Accessories | 6 Quick-Swap Taut Nylon Sifters (2pc each: 120µ, 160µ, 220µ) + 5 Anti-Clog Gravity Balls | |
| Working Capacity | Up to 120 Grams | Up to 150 Grams |
| Voltage | 110V - 240V (Global Compatibility) | |
| Drum Size | 6.26" x 8.66" (159mm x 220mm) | 6.26" x 11.34" (159mm x 288mm) |
The "Clean-Sweep" Protocol
- Loading: Place frozen dry material along with the 5 anti-clog gravity balls into the drum. Leave 30% air space for optimal tumbling. Ensure your nylon sifter is securely installed and kept taut.
- Sifting: Close the lid and set your speed. Monitor the collection through the viewing area to judge purity.
- Collection: Stop the motor once flow slows. The interior ensures easy recovery with a collection tool.
- Maintenance: Clean nylon sifters with cold water or 99% ISO alcohol after each run to maintain performance.
USA LOCAL DELIVERY
Ships from our US Local Warehouse (CA / PA).
Estimated 3-5 Business Day delivery to Lower 48 States.
Troubleshooting Collection:
In order to provide rosineer with the best experience, we collected the past complaints in the list; I would also consider it will be helpful for you. We also especially look forward to you sharing your suggestions and comments, and the issues you have encountered to us via support@dabrpess.com (updating).
- My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why?
- Rosin Press Delivered the Inaccurate Temperature After Measuring with My Infrared (IR) Thermometer Gun
- My Bottle Jack Rosin Press Does Not Hold Pressure, Why?
- Why Can't We Use Rosin Press to Produce the Puck of Flower or Hash?
- Piston Rod of Hydraulic Cylinder Rosin Press Can Lift But It Can Not Move Back
- I Would Like to Upgrade Dabpress Rosin Press, Is This possible and Which Parts Would I Need?
- How to Replace the Bottle Jack?
- About 2x4" Rosin Pre Press Mold, Why Is the inside of the Mold Not 2x4"?
- How to Replace PID module?
- My Temp Controller Box Caused the Issue After Changing the Parameters, How to Fix It?
