10 Ton Driptech Rosin Press - Dual 3x5 Plates, 500 Watts, Pressing 14 Grams - No Pump

Dabpress
dp-hr10t35v-ca
In stock
Unable to process your orders if the items are not available in your local warehouse.
$499.00 $469.00
Warehouse *
$469.00

10 Ton Driptech Rosin Press - 3x5 Platens 14 Grams Materials Loaded, 500 Watts - No Pump Included

Features:

  • Dual Heated Platens Aligned - 4-piece linear bearings guarantee great line-up; frame Made of 6061 Aluminum, Stainless Steel Pillars,10-Ton Hydraulic Cylinder, and Durable PID Temp Controller Box.
  • Artcraft Durable Frame - Made of anodized 6061 aluminum and 4-piece stainless steel chrome rods - non-rusting and durability.
  • Heat Insulation Performance - Low heat transfer bamboo insulator guarantees quick heating-up and protects the cylinder from overheating.
  • 4 Magnets and 4 Feet Pad - Two magnets installed on the frame, other two magnets inside the package; 4 pieces of feet pad included in the package to prevent scratches on the working table.
  • No Pump Included - The pump sold separately, buy the 10-ton pump with pressure gauge from dp-cp590g
Specifications:

  • Temperature Range: 0-399F
  • Power: 500 Watts
  • Voltage: 110/220 Volts
  • Total Weight: 32.1 lbs
  • Package Dimension: 20.4" x 13.3" x 12.9"
  • Frame Dimension: (H) 40cm x (W) 23cm x (D) 21.5cm
  • PID Temp Controller Box Dimension: (H) 21.5cm x (W) 15cm x (D) 8.3cm
  • Pressing Area: 3" x 5"
  • Clearance between Upper and Bottom Platens: 32mm/1.26"
      Pumps for Pairing:

      • Dabpress 10-ton hydraulic hand pump with gauge | dp-cp590g
      • Parts needed to build your own hand pump with gauge | Read Here
      • Hydraulic hand pump recommended near you | Read Here 
      • Add the pressure gauge to Porta Power pump | YouTube Video (1)
      • Add the pressure gauge to BVA p350 pump | YouTube Video (2)

      How to Avoid the Filter Bags from Blowing out?

      • Remove excess stems from flowers.
      • Use less material in your filter bag.
      • Preheating your material first to get it melty before you begin to apply pressure.
      • Apply the pressure more slowly.
      Manual & Troubleshooting Includes:

      • How to choose filters and prepress molds.
      • The yields are not very good, why?
      • How to apply the pressure for optimal yield and quality?
      • How to begin extracting.
      • Important notice.
      • Troubleshooting.
      • Question and answer.
      • Check it out here (Highly recommended to read it before doing a purchase).

        Customer Reviews

        Based on 165 reviews
        92%
        (152)
        7%
        (11)
        1%
        (1)
        0%
        (0)
        1%
        (1)
        M
        M.B.

        10 Ton Driptech Rosin Press - Dual 3x5 Plates, 500 Watts, Pressing 14 Grams - No Pump

        B
        B.
        my 10 ton dab press

        working a ok. no problems.. done maybe 10 press.. very good rosin from my home indoor grow.. mmm good smoke.. good buzz

        get one today

        J
        J.M.
        Easy to use! Amazing build quailty!

        First time using anything like this. Easy to set up, built very well and easy to operate. Also bought the 10tn-12tn pump. Haven’t used the “drip tech”.

        B
        B.
        Everything I wanted!

        Waited a month to review, just to make sure. Very easy to set up and use. No issues with functionality. Everything was well packaged and shipped faster than estimated. Got this press in a bundle and saved about $50. Instructions and tips were very helpful. Started out by pressing flower (fatso) "bottle tech" in a 37u dabpress bag and am getting 28% returns of blond terpy slabs that look almost isolated! So tasty!! Looks better than anything i can buy in the shops and I did it on my kitchen table. Highly recommend this press! Just follow the included instructions and success. Will be getting the sauce plate next to try making jam. Thanks dabpress!!

        T
        T.H.
        Dab

        Verry pleased works great

        QUESTIONS & ANSWERS

        Ask a Question
        • Can I just use an air compressor instead?


          Thanks for reaching out. Since it attaches 10-ton hydraulic cylinder, so it can't be powered with the air compressor. If you mean the foot pump with the air compressor, it is no issue.

        • what is the power wattage per plate?

          250 watts per heating rods, 500 watts in total. It reaches setting temp about 4 mins. Thank you!

        • When are you going to start getting some of these presses back in stock? Half of your inventory has been gone for a while. The European plug model doesn't help.

          10-Ton hydraulic cylinder rosin press is available now. Thank you!

        • How do you use this to make wax ? Are there complete instructions on how to use this machine

          Thanks for your question! It is a solventless extractor to flower,bubble hash,dry sift etc.

        • I have the dp-bj6t35 and use pre cut 7x10 inch wide parchment paper. This press looks less wide, will 7 inch wide parchment fit? Thanks

          Hello! Thanks for your reaching out right here. I recommend you pre-fold the parchment paper into a tube. When you see the rosin coming out, please tilt the unit forward (driptech). The rosin will drip on the paper under the unit.

        • Can you get this with the 3x7 cage plates?

          Thanks for your question! We can't rebuild it into 3x7" plates. 

        • What would I need to get it to work with the pump linked to in this question? Just got mine and can't find any of the suggested pumps in stock: https://www.prolinemax.com/MH3-Manual-10000-PSI-Air-Hydraulic-Hand-Pump-Pressure-auge-72-Hose-Coupler_p_2712.html

          Dear Michael, Thanks for your reaching out right here. I got the response from Stongway Support. 10-Ton hydraulic pump with a pressure gauge will be available on Mid-January, 2019. Could you please start pressing with stongway 10 ton pump without a gauge? and you can replace it once the pump with gauge is available? Merry Christmas! Best regards, Dabpress Team 

        • I have the Strongway pump that is recommended to buy what PSI on the gauge should it be reading while I am pressing flower?

          It depends on how big is your pucks. Usually, 4k-5k is the normal psi at the end of rosin bags.

        • Is in this product realy no pump included? I cant find a pump on your site seperate.

          Pump Recommended: 

          To North America Customer -  Hydraulic Pump with Gauge and Hose - 10-Ton Capacity $79.99 |  Buy Strongway Pump with Guage Off Amazon  $79.99 |  Buy Strongway Pump with Guage Off Northen Tool $49.74 | Porta Power Pump w/o Gauge Off eBay.com To Europe Customer - 10 TON Hydraulic Hand Pump Hose & Gauge Porta Power 

          £90.00 | Buy Porta Power Pump with Gauge Off eBay.co.uk €57.81 | HBM 10 Ton Hydraulic Pump with Manometer To Australia Customer - Manual Hydraulic Pump Aluminum Alloy with gauge $101 | Buy The Pump with Gauge Off Aliexpress.com AU $401.99 | Electric Driven Hydraulic Pump 10000 PSI 70Mpa

        Have Questions? Reach out Here

        Customer Reviews

        Based on 165 reviews
        92%
        (152)
        7%
        (11)
        1%
        (1)
        0%
        (0)
        1%
        (1)
        M
        M.B.

        10 Ton Driptech Rosin Press - Dual 3x5 Plates, 500 Watts, Pressing 14 Grams - No Pump

        B
        B.
        my 10 ton dab press

        working a ok. no problems.. done maybe 10 press.. very good rosin from my home indoor grow.. mmm good smoke.. good buzz

        get one today

        J
        J.M.
        Easy to use! Amazing build quailty!

        First time using anything like this. Easy to set up, built very well and easy to operate. Also bought the 10tn-12tn pump. Haven’t used the “drip tech”.

        B
        B.
        Everything I wanted!

        Waited a month to review, just to make sure. Very easy to set up and use. No issues with functionality. Everything was well packaged and shipped faster than estimated. Got this press in a bundle and saved about $50. Instructions and tips were very helpful. Started out by pressing flower (fatso) "bottle tech" in a 37u dabpress bag and am getting 28% returns of blond terpy slabs that look almost isolated! So tasty!! Looks better than anything i can buy in the shops and I did it on my kitchen table. Highly recommend this press! Just follow the included instructions and success. Will be getting the sauce plate next to try making jam. Thanks dabpress!!

        T
        T.H.
        Dab

        Verry pleased works great

        You have successfully subscribed!