User Guide

RNP2 Usage Instructions1. Insert the threaded handle bar into the tapped hole in the top of the arbor head until it's fully tight.2. Turn the power switch on the bottom rear of the unit to the I (ON) position.3. Lift the handle bar up so that both platens are not touching.4. Adjust the temperature to your desired setting, and allow the unit 10-15 minutes to fully preheat the platens before use. (To set the temperature simply press the SET button on the PID module then use the UP and DOWN arrows to change the temperature and press SET once more...

The Manual Applies to the Following Models: Herb Butter Maker - HBM01Base Recipe1 - Ingredients: 1 -  ½ - 1 Ounce / 7-14 g Botanicals per Cup2-5 Cups / 475-1180 ml Unsalted Butter (Do Not Use Margarine - It Will Not Work)2 -  1 Tablespoon / 15 ml Sunflower Lecithin3 -  Do Not Add Water. 2 - How to Start:1 - Place the ingredients into your machine, and secure the head.Press the temperature button, and select 160°F/71°C (or 130°F/55°C if using the machine at high altitude and/or in a dry climate); then press the 2 Hours/Butter button.2 - After the cycle is complete, unplug...