ROSITEK Manual Pollen Press for Brick MPP2 ( Manual Pollen Press ) - Including large manual pollen press machine for making brick hash - including handheld thread press with double extra long lever handles and a set of pollen press mold, capable of being heated, it machine reaches max 2 pressure of force.
Features:
- About the Brick Press - The manual thread press includes an aluminum-made frame, a rough thread rod, a solid steel nut, 2 pieces of lever handles ( and a 3-piece design aluminum press mold.
- Easy to Operate - Step 1 - after loading flower, tea, pollen, or other fine material inside of the press mold. Step2 - move the mold in-between the base of the press and the rod of the thread press. Step3 - Insert the handle into the double-side holes of the frame and insert another handle into the hole of the threaded rod. Step4 - twist two handles tightly, please insert another hole on the rods for the further process.
- About 3-Piece Pollen Brick Maker - It is made of 6061 aluminum, 3 pieces in total, the thickness of the finished brick is not limited. [Internal dimension of maker: 2.47"(width) x 4.36" (Length) x 1.75" (Depth)]. We don't recommend putting the parchment paper between the material and ram/tray to prevent it from getting stuck while taking it off.
- Capable of Being Heated - The mold made of 6061 aluminum always transfers and retains heat to melt the materials, so you can pre-heat the mold or materials before loading complete or heat up the mold with hot water/another method after loading the materials.
- Caution During the Extraction - (1) The aluminum mold only works with the thread press, so please do not pair the mold with other equipment to protect it from damage (2) The thread press can be paired with a 2x4" pre-press or a cylinder prepress mold. (3) The dimension of the base of the thread press: 5" ( Length ) x 3.1" ( Width ) x 4.3" ( Max Height ).
Specification:
- Maximum Pressure: 2 Ton
- Inner Dimension of Pollen Mold: 3 x 5"
- Max height between base and ram: 105mm/4.13"
- Dimension of the Mold: 2.47" x 4.36" x 1.75"
- Gross Weight: 11 lbs / 5 kg
- Packaging Dimension: 17.1" x 10.6" x 7.6"
- Discreet Packaging
- Warranty: 1-Year
Cautions:
- The aluminum mold only works with the thread press, so please do not pair the mold with other equipment to protect it from damage
- The thread press can be paired with a 2x4" pre-press or a cylinder prepress mold.
ROSITEK Manual Pollen Press for Brick MPP2 ( Manual Pollen Press ) - Including Handheld Thread Press and Press Mold
Troubleshooting Collection:
In order to provide rosineer with the best experience, we collected the past complaints in the list; I would also consider it will be helpful for you. We also especially look forward to you sharing your suggestions and comments, and the issues you have encountered to us via support@dabrpess.com (updating).
- My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why?
- Rosin Press Delivered the Inaccurate Temperature After Measuring with My Infrared (IR) Thermometer Gun
- My Bottle Jack Rosin Press Does Not Hold Pressure, Why?
- Why Can't We Use Rosin Press to Produce the Puck of Flower or Hash?
- Piston Rod of Hydraulic Cylinder Rosin Press Can Lift But It Can Not Move Back
- I Would Like to Upgrade Dabpress Rosin Press, Is This possible and Which Parts Would I Need?
- How to Replace the Bottle Jack?
- About 2x4" Rosin Pre Press Mold, Why Is the inside of the Mold Not 2x4"?
- How to Replace PID module?
- My Temp Controller Box Caused the Issue After Changing the Parameters, How to Fix It?
RELATED PRODUCTS
