PRODUCT INFORMATION
DABPRESS 30 Ton Rosin Press - Dual 7x7 Inches Rosin Press Plates and Dual Accurate PID Temperature Controllers
Features:
- Very Durable Mount - 84-Pound Heat Press - The mount is made of 6061 aluminum, 4 pieces of chrome steel posts, and a 30-ton cylinder with a large flat saddle. The one-time forming aluminum base makes the equipment overweight, but it also supports long-term stable operation during the process of extraction.
- 7x7" Sized Heated Platens - 7x7" Heated Platens - The big enough plates and the 30-ton force of pressure are able to handle up to 3 ounces of materials, but we still recommend loading several 2x4 press bags, and the total weight does not exceed 2 ounces for the better yield.
- Upgraded Temp Controller - 4pc Heating Rods - 2 pieces of cartridge heaters for each plate, 300w per heater, 1,200 watts in total, because the heating plate is too large, it will take about 10 minutes to reach 200F.
- 30 Ton Cylinder Included - 30T Customized Cylinder - It includes an NPT 3/8" female coupler on the cylinder ram, so it allows hooking up the hydraulic hand / electric pump with the NPT 3/8" male coupler, there is a flat saddle on the cylinder ram that helps get the uniform pressure on the pressing bag so as to extend the service life and increase the yield.
- Upgraded PID Temp Controller - Accurate Temp Delivered - The 30-ton heat press set up dual upgraded PID temperature controller - replaceable and pluggable, not only detects and delivers the even temperature but also easily replace and maintain.
-
No Pump Included - Relative Pump Sold Separately - We recommend a hydraulic hand pump with NPT 3/8" male fitting and it offers more than 30 tons of pressure like Dabpress CP700 max. BVA P1000 or TEMCo hand pumps for pairing.
Specifications:
- Temperature Range: 0-399F
- Power: 1,200 Watts
- Voltage: 110 Volts
- Net Weight: 80 Pounds
- Working Area: 7" x 7"
- The Distance/Clearance Between Dual Heated Platens: 50mm/1.96 inches.
- The Dimension of the 30-ton Press: 11.8" x (W) x 11.2" (L) x 21"(H)
- The Dimension of the Cylinder: 9 inches in height; 3.5 inches in Diameter
- It spends 10 minutes to reach the set temp 200F
Pump for Pairing:
- Dabpress cp700 max pump - Shop Now
- BVA hydraulic hand pump
- Temco automatic pump
- How to build manual or electric rosin press - Learn More
How to Avoid the Filter Bags from Blowing out?
- Remove excess stems from flowers.
- Use less material in your filter bag.
- Preheating your material first to get it melty before you begin to apply pressure.
- Apply the pressure more slowly.
Precaution for Use:
- My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why? - Learn More
- Piston Rod of Hydraulic Cylinder Rosin Press Can Lift But It Can Not Move Back - Learn More
Troubleshooting
Troubleshooting Collection:
In order to provide rosineer with the best experience, we collected the past complaints in the list; I would also consider it will be helpful for you. We also especially look forward to you sharing your suggestions and comments, and the issues you have encountered to us via support@dabrpess.com (updating).
- My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why?
- Rosin Press Delivered the Inaccurate Temperature After Measuring with My Infrared (IR) Thermometer Gun
- My Bottle Jack Rosin Press Does Not Hold Pressure, Why?
- Why Can't We Use Rosin Press to Produce the Puck of Flower or Hash?
- Piston Rod of Hydraulic Cylinder Rosin Press Can Lift But It Can Not Move Back
- I Would Like to Upgrade Dabpress Rosin Press, Is This possible and Which Parts Would I Need?
- How to Replace the Bottle Jack?
- About 2x4" Rosin Pre Press Mold, Why Is the inside of the Mold Not 2x4"?
- How to Replace PID module?
- My Temp Controller Box Caused the Issue After Changing the Parameters, How to Fix It?
CUSTOMER REVIEWS
RELATED PRODUCTS
