[ Upgrade ] ROSITEK 2-Ton Manual Rosin Heat Press Bundle - 3x3" Heated Plates, Dual Heat and Thermocouple
Features:
- Non-rusting & Non-breaking Guarantee - The customized lever system is made of a blackened steel body, U-shape steel, chrome steel connecting rod, pressure adjusting knob, and a flexible steel plate with an extra-long handle that provides high leverage pressing capabilities with less user effort.
- Keep Smashing Down for Each Operation - Both the U-shape steel and the steel plate installed on the upper heat plate are flexible in order to keep extracting the oil from the flower or the pressing bag. We recommend repeated smashes after adjusting the pressure knob for a better yield.
- 3x3" Heated Plates and Related Accessories - The 2-ton small heat press machine is capable of pressing up to 5 grams of flower or fine material. We recommend compacting material into a small disk shape with a cylindrical/round pre-press mold and then pressing. you will get clean presses and no loss from the nylon micron bag.
- Effortless Operations Recommended - (1) Please put the machine on a shorter workbench, after holding the armrest of the machine, press the handle down until you hear a "click". Please put your hand on the machine pedal, and then pull the handle up after times up. (2) Operation on the ground - please tilt the machine at a 45-degree angle, and then press the handle down. After the time is up, step on the pedal while pulling the handle up.
- Mini 2-Ton Heat Press for Starter/Beginner - The personal heat press machine consists of an anodized 6061 aluminum frame, a customized lever system, and a set of PID temperature controllers. Well noted, the machine offers dual heating (150w each heating rod, 300 watts in total ).
Specifications:
- Temperature Range: 0-399F
- Power: 300 Watts
- Voltage: 110v
- Gross Weight: 18.5 lbs
- Package Dimension: 20.1" x 8.3" x 13.4"
- Frame Dimension: 10.3"(L) x 5.8"(W) x 16.7" (H)
- Working Surface: 3" x 3"
- Clearance between Upper and Bottom Platens: 1.7 Inch
How to Avoid the Filter Bags from Blowing out?
- Remove excess stems from flowers.
- Use less material in your filter bag.
- Preheating your material first to get it melty before you begin to apply pressure.
- Apply the pressure more slowly.
Tips:
- 1 - Press slowly, no need to smash and get out like with the hair straightener because the temps are low enough to get a longer press and thus a better product.
- 2 - Again, press slowly and squeeze the rosin out of your puck applying the full lockdown pressure for the latter half of the press.
ROSITEK RMP2 Unboxing by YouTuber - insidehydro
Rositek RMP2 Rosin Press - Unboxing 2 by YouTube - Sticky Fly
ROSITEK RMP-2 First Press by YouTube Possum3772
Troubleshooting Collection:
In order to provide rosineer with the best experience, we collected the past complaints in the list; I would also consider it will be helpful for you. We also especially look forward to you sharing your suggestions and comments, and the issues you have encountered to us via support@dabrpess.com (updating).
- My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why?
- Rosin Press Delivered the Inaccurate Temperature After Measuring with My Infrared (IR) Thermometer Gun
- My Bottle Jack Rosin Press Does Not Hold Pressure, Why?
- Why Can't We Use Rosin Press to Produce the Puck of Flower or Hash?
- Piston Rod of Hydraulic Cylinder Rosin Press Can Lift But It Can Not Move Back
- I Would Like to Upgrade Dabpress Rosin Press, Is This possible and Which Parts Would I Need?
- How to Replace the Bottle Jack?
- About 2x4" Rosin Pre Press Mold, Why Is the inside of the Mold Not 2x4"?
- How to Replace PID module?
- My Temp Controller Box Caused the Issue After Changing the Parameters, How to Fix It?