4 Ton Starter Rosin Press Pro - Dual PID Controller Box & Replaceable 4-ton Bottle Jack
4 Ton Starter Bottle Jack Rosin Press Pro - Including Dual Heating PID Temp Controllers & Replaceable Jack
# Please take a look at our gears from Google Drive for product size comparison- Learn More
- 3x5" Anodized Heated Platens - Well suited to squeeze 7-10g materials; Easy to clean and the best flavor guaranteed.
- Heat Insulation Performance - Low heat transfer bamboo insulator guarantees quick heating-up and protects the bottle jack from overheating.
- Above 1,000 PSI Delivered - Pairs well with cylinder pre-press mold and 2x4" rosin filter, achieving and maintaining optimal pressure utilizing a vertical filter build, and a pressed puck size of 2.4 sq/in.
- Artcraft Durable Frame - Made of anodized 6061 aluminum and 4-piece stainless steel chrome rods - non-rusting and durability.
- Dual Heated PID Temp Box - 4-ton rosin press pro includes a big dual heated controller box to detect and read out instant temperature.
The Bottle Jack Won't Hold Pressure?
- You may need to Bleed The Bottle Jack first.
- There is a safety valve covered by a red cap on the bottle jack. Simply remove the red cap and rotate the safety valve 90 - 180 degrees clockwise to adjust the pressure. We don't recommend to do that If the bottle jack already works well. It may cause fluid leaking if rotated further than recommended.
- Temperature Range: 0-399F
- Power: 500 Watts
- Voltage: 110/220 Volts
- Total Weight: 31.5 lbs
- Package Dimension: 21.2" x 14" x 12.4"
- Frame Dimension: (H) 45cm x (W) 22.5cm x (D) 21.5cm
- PID Temp Controller Box Dimension: (H) 15cm x (W) 11.5cm x (D) 6.8cm
- Working Surface: 3" x 3"
- The tonnage of Original Bottle Jack: 4 Ton
- Height of Original Bottle Jack: 7.3"
- Clearance between Upper and Bottom Platens: 33mm/1.3"
# 4-ton starter press pro offers a smaller clearance to avoid making the pucks with it and protect the working surface from scratching.
- 2x4/2x4.5" filter > Pairs 3x5" size platen > Fits up to 4-ton pressure
- 2.5x4.5" filter > Pairs 3x5"/3x7"/4x7" size platen > Fits up to 10-ton pressure
- 3x7" > Pairs up to 3x7"/4x7" size platen > Fits up to 10-ton pressure
- How to pick up pre press mold to pair the filter learn more from PrePress Collection
- Double squashes by cutting 2x4.5" rosin bags into half for flower if pairing it with cylinder prepress mold ( bottle tech styled prepress mold )
- With 2x4" rectangular mold - Create a slim puck to pair it with 2x4.5" rosin bags ( 2x4.5" bag could be cut into 2x4" bag )
- 160, 120 and 90 micron bags were suitable for flower extraction, and 37 micron is for hash.
- Please don't load the full materials inside bags to protect the bags from blowing out.
- 110-volt units for the USA, Canada, Mexico; 220-volt units for Europe customers, pick the correct voltage before shopping.
PID TEMP CONTROLLER SETTING:
Press "SET" button to activate temperature controller
Press ◄ button to increase and decrease the value at hundreds, tens and one's places
Press ▼ or ▲ from 0-9 for your desired temp
Press "SET" button to lock the desired temperature in place
WARRANTY
- One Year Warranty for the Springs, Plate, Frame and Cage.
- One Year Warranty for the PID Temp Controller Box.
- Only Pay 50% to Get A New Temp Controller Box Once out of Warranty.
How to Save Your Money?
1, Please buy our bundled products - Learn more
2, Please read our news about promotional products - Learn more
3, If the total order is less than $60, buy it off our Amazon Online Store - Check the link on the detail page.
Be Noted, Please!
- Bundle order discount and our promotion code cannot be used at the same time.
- To recommend Amazon prime member ( Located in the USA ) for saving on shipping charges to buy off our Amazon online store.
Our Policies
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.