2.5x7 DIY Caged Cube Kit - 4 Heating Rods - Build 20 - 30 Ton Hydraulic Rosin Heat Press Kit

Dabpress
dp-rp257-110
In stock
Rosin Cage Kits
$599.00 $439.00
Warehouse *
$439.00

Dabpress dp-rp257 Pro Caged Cube Kits With Quad Anodized Plates in Cube, Dual Heaters, Dual Temp Sensors, Temperature Control Box - Complete Setup To Pair With A Hydraulic Press for Commercial Use


Notice:

  • dp-rp257 Pro is Fully Assembled at the Factory. Simply Move Cube Kit to Hydraulic Shop Press and Begin Working.
  • Does Not Fit Some A-Frame Press, H-Frame is Recommended for Proper Clearance.
  • Well-packaged, Without Any Marks on Thickened Plain Carton.
  • Support Use about Yield and Press, Read Our Blog
Why Can't I Use Dabpress Temp Controller Box for E-nail? Read Here
      Puck Maker Recommended:
        • Bottle Tech Pre Press Mold | dp-pm3015r | 3.5-7g Flower Only
        • Hammer Pollen Press | dp-pm30s | 3.5-10g Hash, Kief, and Flower 
        • Large Cylinder PrePess Mold | dp-pm40r | 7-14g Flower Recommended
        • 2x4" Pre Press Mold | dp-pm4007s | 7-14g Hash & Flower
        • PrePress Collection
        Packing List:

        • 1Pcs x Pro Anodized Plates Cube
        • 1Pcs x PID Control Box dp-tc02r165 [ Powers Two Heating Plates Only ]
        • Instruction Manual 
        • 1Pcs Screwdriver
            Specifications:

            • Temperature Range: 0-399F
            • Power: 600W or 1,200W (If Using Second Control Box Sold Separately)
            • Voltage: 110/220 Volts 
            • Plate Size: Dual 2.5" x 7" 
            • Cube Dimensions: 3.5" x 11" x 6.3"
            • External Package: 15.3" x 13.8" x 9"
            • Gross Weight: 23.3lbs
                Attentions:

                • 110V Version Is In Fahrenheit, 220V Version Is In Celsius
                • Offer Free Shipping to Australia, E.U., North America and the UK
                • Point Piston Ram of  Hydraulic Shop Press at Circle Of Cube Kit  dp-rp257 Pro
                • Stroke Extend of The Shop Press >6"
                • Hydraulic Shop Press < 20 Tons
                • One Person Operation
                • Keep It out of Reach of Children
                • Do Not Switch on PID Temp Controller Box Without Putting Rod into Aluminum Platen
                • Dabpress Digital Temp Controller Is Not Compatible to E-Nail For Vaping

                    Customer Reviews

                    Based on 1 review
                    100%
                    (1)
                    0%
                    (0)
                    0%
                    (0)
                    0%
                    (0)
                    0%
                    (0)
                    S
                    S.
                    Quad plates, how massive!

                    I received this cube kit yesterday and began my pressing. The plates take a while to heat up due to 2 heaters in first revision, my understanding is future revision will include 4 heaters. In a way I am happy to only have 2 heaters as it is only running 600W and that is perfect for my rosin room which is already taxed for power. Perhaps in the future I will look at the upgraded rosin control box.

                    This press is best used with magnetic alignment jig dp-mj257, or with a second rosineer to assist with aligning the puck (if not using the jig) on the other side of the press.

                    A lot of pressure is needed to operate this press under maximum loads, A 50-ton H-frame press would be recommended. 35 sq/in is what you get with these plates, divided by 2 sets. If wanting to achieve 1600 PSI across the entire surface of the plates (using largest compatible rosin filters) you will need at least 28 tons of pressure.

                    Overall these plates are built extremely well, the hardware is top notch and heavy duty. For the commercial presser, this will have many uses, especially pressing 2 different strains at the same time, keeping their rosin separate.

                    How to Save Your Money?

                    1, Please buy our bundled products - Learn more
                    2, Please read our news about promotional products - Learn more
                    3, If the total order is less than $60, buy it off our Amazon Online Store - Check the link on the detail page.

                    Be Noted, Please!

                    • Bundle order discount and our promotion code cannot be used at the same time.
                    • To recommend Amazon prime member ( Located in the USA ) for saving on shipping charges to buy off our Amazon online store.

                    Our Policies

                    QUESTIONS & ANSWERS

                    Have a Question?

                    Be the first to ask a question about this.

                    Ask a Question
                    Have Questions? Reach out Here

                    Customer Reviews

                    Based on 1 review
                    100%
                    (1)
                    0%
                    (0)
                    0%
                    (0)
                    0%
                    (0)
                    0%
                    (0)
                    S
                    S.
                    Quad plates, how massive!

                    I received this cube kit yesterday and began my pressing. The plates take a while to heat up due to 2 heaters in first revision, my understanding is future revision will include 4 heaters. In a way I am happy to only have 2 heaters as it is only running 600W and that is perfect for my rosin room which is already taxed for power. Perhaps in the future I will look at the upgraded rosin control box.

                    This press is best used with magnetic alignment jig dp-mj257, or with a second rosineer to assist with aligning the puck (if not using the jig) on the other side of the press.

                    A lot of pressure is needed to operate this press under maximum loads, A 50-ton H-frame press would be recommended. 35 sq/in is what you get with these plates, divided by 2 sets. If wanting to achieve 1600 PSI across the entire surface of the plates (using largest compatible rosin filters) you will need at least 28 tons of pressure.

                    Overall these plates are built extremely well, the hardware is top notch and heavy duty. For the commercial presser, this will have many uses, especially pressing 2 different strains at the same time, keeping their rosin separate.

                    You have successfully subscribed!