10-Ton Portable Tabletop Driptech Hydraulic Heat Press Kit - No Pump

In stock

Hydraulic Heat Press

Dabpress

$499.00
Warehouse
-
+
$499.00

Mini Heat Press Kit | Dabpress dp-hr10t35v 10-Ton Hydraulic Cylinder Rosin Press  | 3x5" Anodized Dual Heating Plates | Perfect Alignment | Quick Heating - 1/4" NPT Quick Coupling, Well Pairs to 10-ton Porta Power Hand Pump with Dabpress Gauge Kit.

Features:

  • Perfect Alignment of Top and Bottom Heat Platens - 4 Piece Linear Bearings Guarantee Great Line-up; Frame Made of 6061 Aluminum, Stainless Steel Pillars,10-Ton Hydraulic Cylinder, and Durable PID Temp Controller Box.
  • Pairs Well with a Variety of 10 Ton Hydraulic Pump Configurations - The Machine Includes Quick Couplers Compatible to 1/4" NPT Hydraulic Pumps Such As Porta Power, or Build Up Your Own Pump (DIY).
  • Drip Technology Integrated - Driptech System Allows Oil to Drip Down Onto Parchment Paper Below, Preserving the Terpenes.
  • Great Insulation Performance - Heating up Quickly to Reach Pre-set Temperature in Minutes; Protects the Hydraulics from Overheating.
  • 3x5" Portable Small Heat Press - Easy to Move, and Perfect for Industrial or Personal Use in A Small Apartment, 3x5" Plates Are Common Size and Well Suited with 3.5g - 28g Batches.  Fits Easily on 2x2' Work Table.
  • 4 Magnets and 4 Feet Pad - Two Magnets Installed on the Frame, Other Two Magnets Included in the Package; 4 Pieces of Feet Pad Included in the Package to Prevent Scratches on the Working Table.

Pump Recommended: 

         North America Customer -  We recommend Porta Power 10-Ton Pump and Dabpress Gauge Kit (some assembly required)

* No Gauge on Your Pump?  Check Out Our Pressure Gauge Kit for 1/4" NPT Pump - $29.99 | Dabpress Pressure Gauge Kit | Available on Dabpress.com

         Build Up 1/4" NPT Hydraulic Hand Pump with Gauge (DIY) - Watch the Video as Shown Below.

 Build Up BVA Hydraulics P350 Hand Pump with Gauge (DIY) - Watch the Video as Shown Below.

          Europe Customer - 10 TON Hydraulic Hand Pump Hose & Gauge Porta Power 

              Australia Customer - Manual Hydraulic Pump Aluminum Alloy with gauge

          Parts Needed To Build Your Qwn 10-Ton Hydraulic Hand Pump With Gauge:

          Specifications:

          • Temperature Range: 0-399F
          • Power: 500 Watts
          • Voltage: 110 Volts [220 Volts Is Available on Official Store]
          • Total Weight: 32.1 lbs
          • Package Dimension: 20.4" x 13.3" x 12.9"
          • Frame Dimension: (H) 40cm x (W) 23cm x (D) 21.5cm
          • PID Temp Controller Box Dimension: (H) 21.5cm x (W) 15cm x (D) 8.3cm
          • Pressing Area: 3" x 5"
            Packing List:

            • 1 x Mini Hydraulic Heat Press Kit
            • 1 x Instruction Manual
            • 1 x Non-stick Silicon Mat
              Tags:

              • Pair It with a Porta Power Hydraulic Hand Pump. 1/4" Male and Female Couplers Included in the Package (one attached to Cylinder).
              • Highly Recommend to Watch Videos about "How To Use Heat Press Bag and Pre-Press Mold Effectively" from Our Website
              • Recommend dp-pm3015r Cylinder Pre-press Mold to Pair with This Hydraulic Rosin Press Kit
              • Recommend dp-bt160ns Rosin Press Filters - 160-micron bag for flower.
              Attentions:

              • One Person Operation
              • Keep It out of Reach of Children
              • No Pump Included 
              • Please Attach The Included Fitting Onto End Of Hydraulic Hose To Ensure Proper Function Of Quick Couplers.
              • If Pairing to BVA Hydraulics Hand Pump, Be Sure To Order All Necessary Parts To Build It Up (DIY)
              PID Controller Setting: 

              • Press "SET" button to activate temperature controller
              • Press ◄ button to increase and decrease the value at hundreds, tens and ones places
              • Press ▼ or ▲ from 0-9 for your desired temp
              • Press "SET" button to lock the desired temperature in place

              How To Build Your Own Pump With Gauge:

              Tech Support: dp@dabpress.com 

               

               

              How to Save Your Money?

              1, Please buy our bundled products - Learn more
              2, Please read our news about promotional products - Learn more
              3, If the total order is less than $60, buy it off our Amazon Online Store - Check the link on the detail page.

              Be Noted, Please!

              • Bundle order discount and our promotion code cannot be used at the same time.
              • To recommend Amazon prime member ( Located in the USA ) for saving on shipping charges to buy off our Amazon online store.

              Our Policies

              Customer Reviews

              Based on 13 reviews
              92%
              (12)
              0%
              (0)
              0%
              (0)
              0%
              (0)
              8%
              (1)
              P
              P.W.
              10 tonne driptech press.

              Lovely bit of kit, super fast delivery and very well built. Would struggle to build this quality at this price as a diy project. Very happy with the press and results.

              M
              M.
              fast delivery

              extremely fast delivery to europe (not EU).
              Looks good, heating works, no pump yet :)..

              J
              J.
              Waiting is torture

              I was waiting for the strongway pump to come back in stock but no luck. I was tired of waiting and bought a porto power pump off of walmart and the gauge kit from dab press. I spent 3 weeks waiting to press. I should have bought my porto power pump sooner. Enough first world problems, now on to the dab press, it is very well built and I have gone up to 5500 PSI reading on the gauge with the 2.5x4.5 micron bags with 18 grams with my home made pre press. I wish the lower magnet was off to the side instead of in the center, that's my only criticism and a minor one at that. Best money I've spent in quite a while.

              M
              M.S.
              I think I’m amazed

              As the previous reviewer touched on, price and quality were really important buying points. What sold me though was it’s size. Ten tons packed into that small of a frame, heavy duty pic control box, anodized plates, insulated with bamboo, and it’s capability for driptech.
              At the the time I bought it, DabPress also had a 10% off promotion at the time making it come out to $450 at the end. For the quality, multiple features, power/size ratio it really is the best press on the market for home use or even small on-site production. With it being so portable it’s feasiblea to do both. It’s also affordable enough to have 4 presses running on an electric pump setup at the same time doing an ounce each. I’m grateful to have one and be in a state where press material is stoopid cheap.

              J
              J.J.
              Perfect!

              So was looking for a press for a bit, and quality and price point were 2 main concerns in my decision, and after doing some research, this press is the one I went with. After doing some presses, very pleased with the results, and quality of the press was excellent, at a reasonable price also, my 2 main concerns. I highly recommend this product to anyone and the strongway pump with the built in pressure gauge is the way to go to get that right squeeze. I just ordered dabpress's pre press mold and I can't wait to get it to make some perfect sized pucks for even higher rosin yields . Highly recommend this press!!

              QUESTIONS & ANSWERS

              Ask a Question
              • Can I just use an air compressor instead?


                Thanks for reaching out. Since it attaches 10-ton hydraulic cylinder, so it can't be powered with the air compressor. If you mean the foot pump with the air compressor, it is no issue.

              • what is the power wattage per plate?

                250 watts per heating rods, 500 watts in total. It reaches setting temp about 4 mins. Thank you!

              • When are you going to start getting some of these presses back in stock? Half of your inventory has been gone for a while. The European plug model doesn't help.

                10-Ton hydraulic cylinder rosin press is available now. Thank you!

              • How do you use this to make wax ? Are there complete instructions on how to use this machine

                Thanks for your question! It is a solventless extractor to flower,bubble hash,dry sift etc.

              • I have the dp-bj6t35 and use pre cut 7x10 inch wide parchment paper. This press looks less wide, will 7 inch wide parchment fit? Thanks

                Hello! Thanks for your reaching out right here. I recommend you pre-fold the parchment paper into a tube. When you see the rosin coming out, please tilt the unit forward (driptech). The rosin will drip on the paper under the unit.

              • Can you get this with the 3x7 cage plates?

                Thanks for your question! We can't rebuild it into 3x7" plates. 

              • What would I need to get it to work with the pump linked to in this question? Just got mine and can't find any of the suggested pumps in stock: https://www.prolinemax.com/MH3-Manual-10000-PSI-Air-Hydraulic-Hand-Pump-Pressure-auge-72-Hose-Coupler_p_2712.html

                Dear Michael, Thanks for your reaching out right here. I got the response from Stongway Support. 10-Ton hydraulic pump with a pressure gauge will be available on Mid-January, 2019. Could you please start pressing with stongway 10 ton pump without a gauge? and you can replace it once the pump with gauge is available? Merry Christmas! Best regards, Dabpress Team 

              • I have the Strongway pump that is recommended to buy what PSI on the gauge should it be reading while I am pressing flower?

                It depends on how big is your pucks. Usually, 4k-5k is the normal psi at the end of rosin bags.

              • Is in this product realy no pump included? I cant find a pump on your site seperate.

                Pump Recommended: 

                To North America Customer -  Hydraulic Pump with Gauge and Hose - 10-Ton Capacity $79.99 |  Buy Strongway Pump with Guage Off Amazon  $79.99 |  Buy Strongway Pump with Guage Off Northen Tool $49.74 | Porta Power Pump w/o Gauge Off eBay.com To Europe Customer - 10 TON Hydraulic Hand Pump Hose & Gauge Porta Power 

                £90.00 | Buy Porta Power Pump with Gauge Off eBay.co.uk €57.81 | HBM 10 Ton Hydraulic Pump with Manometer To Australia Customer - Manual Hydraulic Pump Aluminum Alloy with gauge $101 | Buy The Pump with Gauge Off Aliexpress.com AU $401.99 | Electric Driven Hydraulic Pump 10000 PSI 70Mpa

              Recently Viewed Products

              Customer Reviews

              Based on 13 reviews
              92%
              (12)
              0%
              (0)
              0%
              (0)
              0%
              (0)
              8%
              (1)
              P
              P.W.
              10 tonne driptech press.

              Lovely bit of kit, super fast delivery and very well built. Would struggle to build this quality at this price as a diy project. Very happy with the press and results.

              M
              M.
              fast delivery

              extremely fast delivery to europe (not EU).
              Looks good, heating works, no pump yet :)..

              J
              J.
              Waiting is torture

              I was waiting for the strongway pump to come back in stock but no luck. I was tired of waiting and bought a porto power pump off of walmart and the gauge kit from dab press. I spent 3 weeks waiting to press. I should have bought my porto power pump sooner. Enough first world problems, now on to the dab press, it is very well built and I have gone up to 5500 PSI reading on the gauge with the 2.5x4.5 micron bags with 18 grams with my home made pre press. I wish the lower magnet was off to the side instead of in the center, that's my only criticism and a minor one at that. Best money I've spent in quite a while.

              M
              M.S.
              I think I’m amazed

              As the previous reviewer touched on, price and quality were really important buying points. What sold me though was it’s size. Ten tons packed into that small of a frame, heavy duty pic control box, anodized plates, insulated with bamboo, and it’s capability for driptech.
              At the the time I bought it, DabPress also had a 10% off promotion at the time making it come out to $450 at the end. For the quality, multiple features, power/size ratio it really is the best press on the market for home use or even small on-site production. With it being so portable it’s feasiblea to do both. It’s also affordable enough to have 4 presses running on an electric pump setup at the same time doing an ounce each. I’m grateful to have one and be in a state where press material is stoopid cheap.

              J
              J.J.
              Perfect!

              So was looking for a press for a bit, and quality and price point were 2 main concerns in my decision, and after doing some research, this press is the one I went with. After doing some presses, very pleased with the results, and quality of the press was excellent, at a reasonable price also, my 2 main concerns. I highly recommend this product to anyone and the strongway pump with the built in pressure gauge is the way to go to get that right squeeze. I just ordered dabpress's pre press mold and I can't wait to get it to make some perfect sized pucks for even higher rosin yields . Highly recommend this press!!