New 4x7 DIY Uncaged Press Plates Kit - 1,200 Watts - Build up 20-30 Ton Hydraulic Rosin Press

Dabpress
dp-rp47
In stock
Uncaged Press Plates
$429.00 $319.00
Warehouse *
$319.00
Dabpress dp-rp47 Anodized Uncaged Press Plate Kits with 4 Pcs Rod Heaters, Dual Temp Sensors, Temperature Control Box -  Pair it With 20-Ton  H Frame Hydraulic Press


Features:

  • Alignment & Safety - Newer Version dp-rp35 Allows the Bottom Platen to Secure on the Hydraulic Press to Align Both Platens for Safety During Pressing.
  • Innovative 8mm Slim Insulator - SGS Certified Food Grade Insulation, Allows Machine to Reach a Temperature of 200F in 4-5 Minutes While Protecting the Hydraulics From Overheating.
  • 4x7" Heat Press Plates - Well Suited to Large Batches Pressing for Industrial Use; Pairs Well With a 20 Ton Hydraulic Shop Press
  • Food-grade Heated Platens - Made of Anodized 6061 Aluminum; Easy to Clean and Best Flavor Guaranteed.
  • 1,200 Watts with 4Pcs Heating Rods - Quick Heating Up to Set Temperature; Evenly, and Accurate Temperature Delivered Utilizing Separated Thermocouple and Heating Rods.
  • Long Working Life Guaranteed - More Than 6,000 Times Service of Heating Rods

Notice:

  • Each Platen Powered by 2x 300W Rod Heaters. 
  • Heats Up Quickly Using 1,200 Watts
  • dp-rp47 Heat Plate Kit Needs to be Attached to a Hydraulic Device by Yourself.
  • Well-packaged, Without Any Marks on Thick Carton.
  • Support Use about Yield and Press, Read Our Blog

Packing List:

  • 4x7" Anodized Heat Press Plates
  • 1Pcs x PID Temp Control Box with 4 Pcs Rod Heaters
  • Instruction Manual 
  • 2Pcs x Screwdriver Tool 
    Specifications:

    • Temperature Range: 0-399F 
    • Voltage: 110/220 Volts 
    • Power: 1,200W
    • Each Heater: 300W
    • Plate Size: 4" x 7" 
    • Gross Weight: 13.86Lbs
      Puck Maker Recommended:
        • Bottle Tech Pre Press Mold | dp-pm3015r | 3.5-7g Flower Only
        • Hammer Pollen Press | dp-pm30s | 3.5-10g Hash, Kief, and Flower 
        • Large Cylinder PrePess Mold | dp-pm40r | 7-14g Flower Recommended
        • 2x4" Pre Press Mold | dp-pm4007s | 7-14g Hash & Flower
        • PrePress Collection
          Attentions:

          • 110V Version Is In Fahrenheit, 220V Version Is In Celsius
          • Point Piston Ram of Hydraulic at Center of Top-platen and Then Tighten 4 Included Bolts
          • Put Bottom-platen And Top-platen In Alignment Together on Bamboo Plank
          • Compatible with Any Hydraulic Press < 20 Tons
          • Press Ram Diameter < 2.16 inch ( 55mm )
          • Do Not Switch on PID Temp Controller Box Without Putting Rod into Aluminum Platen
          • One Person Operation
          • Keep It out of Reach of Children 

          Instructions To Secure Platens to Hydraulic Press Frame:

          • 1# Install the top heated plates onto the ram of the hydraulic press.
          • 2# Install the bottom heated plate using the long threaded rod through the bamboo insulation, then attached to the worktable plate.
          • 3# Lower the ram on the hydraulic press just until both plates touch.
          • 4# Adjust the position of the plates if necessary, so they are aligned.
          • 5# Ensure bamboo plank is aligned under the bottom plate.
          • 6# Tighten the nut on the long threaded rod to secure it to the worktable plate below.

          Customer Reviews

          Based on 13 reviews
          77%
          (10)
          23%
          (3)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          M
          M.C.
          Works great

          Recommend it

          C
          C.T.
          Nice stuff

          I have only had my plates for a week and they seem to be very nice. But I do Have a 5° fluctuation on one of the plates it keeps going bouncing between the 5° but seems to be working very good I think a piece of insulation underneath that plate will fix everything

          Dear Mr. Thomas, Thanks for your unbiased product review. From the image you attached, it looks you forgot putting ' Bamboo Insulator Included' between the bottom plates and working table of bench press. I consider it will fix the issue caused. Regards, Dabpress Team
          S
          S.S.
          Awesome Product

          Really impressed with your product.Plates are finished really well , and PID Controller is accurate.Cable's are well insulated .Also rapid delivery.
          Good work, i will definitely be back in the future.

          J
          J.v.d.L.
          Great product!!

          these plates work very good and heat up quickly. they come very well packed including a bamboo insulation plate and a tool to hold the bottem plate in place.
          the only thing I didn't like was the additional costs that came with the package for customs. This is an additional 25% to the amount I payed in the webshop. In the end I think it is all woth it for this high quality product!
          A very happy custumer from the Netherlands.

          P
          P.R.
          Dabpress ucaged 4x7

          Made a 20 rosin press w these and it works perfectly if I had a do over I wouldn’t hesitate to buy again . Great A tip on the press it fits a harbor freight 20 ton perfectly and has a clamping attachment to secure it .make sure you bleed your jack before using

          How to Save Your Money?

          1, Please buy our bundled products - Learn more
          2, Please read our news about promotional products - Learn more
          3, If the total order is less than $60, buy it off our Amazon Online Store - Check the link on the detail page.

          Be Noted, Please!

          • Bundle order discount and our promotion code cannot be used at the same time.
          • To recommend Amazon prime member ( Located in the USA ) for saving on shipping charges to buy off our Amazon online store.

          Our Policies

          QUESTIONS & ANSWERS

          Have a Question?

          Be the first to ask a question about this.

          Ask a Question
          Have Questions? Reach out Here

          Customer Reviews

          Based on 13 reviews
          77%
          (10)
          23%
          (3)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          M
          M.C.
          Works great

          Recommend it

          C
          C.T.
          Nice stuff

          I have only had my plates for a week and they seem to be very nice. But I do Have a 5° fluctuation on one of the plates it keeps going bouncing between the 5° but seems to be working very good I think a piece of insulation underneath that plate will fix everything

          Dear Mr. Thomas, Thanks for your unbiased product review. From the image you attached, it looks you forgot putting ' Bamboo Insulator Included' between the bottom plates and working table of bench press. I consider it will fix the issue caused. Regards, Dabpress Team
          S
          S.S.
          Awesome Product

          Really impressed with your product.Plates are finished really well , and PID Controller is accurate.Cable's are well insulated .Also rapid delivery.
          Good work, i will definitely be back in the future.

          J
          J.v.d.L.
          Great product!!

          these plates work very good and heat up quickly. they come very well packed including a bamboo insulation plate and a tool to hold the bottem plate in place.
          the only thing I didn't like was the additional costs that came with the package for customs. This is an additional 25% to the amount I payed in the webshop. In the end I think it is all woth it for this high quality product!
          A very happy custumer from the Netherlands.

          P
          P.R.
          Dabpress ucaged 4x7

          Made a 20 rosin press w these and it works perfectly if I had a do over I wouldn’t hesitate to buy again . Great A tip on the press it fits a harbor freight 20 ton perfectly and has a clamping attachment to secure it .make sure you bleed your jack before using

          You have successfully subscribed!