10 Ton Portable Driptech Rosin Press - No Pump Included - 3x5 Inches Heated Platens Included

Dabpress
dp-hr10t35v-110
In stock
Hydraulic Heat Press
$499.00 $469.00
Warehouse *
$469.00

Small Driptech Rosin Heat Press Kit | Dabpress dp-hr10t35v 10-Ton Hydraulic Cylinder Rosin Press  | 3x5" Anodized Dual Heating Plates | Perfect Alignment | Quick Heating - 1/4" NPT Quick Coupling, Pairs Well to Dabpress Hydraulic Hand Pump.

Features:

  • Perfect Alignment of Heated Platens - 4 Piece Linear Bearings Guarantee Great Line-up; Frame Made of 6061 Aluminum, Stainless Steel Pillars,10-Ton Hydraulic Cylinder, and Durable PID Temp Controller Box.
  • Pairs Well with a Variety of 10 Ton Hydraulic Pump Configurations - The Machine Pairs with Dabpress 10-Ton Hydraulic Hand Pump.  Also, Includes Quick Couplers Compatible to 1/4" NPT Hydraulic Pumps Such As Porta Power, Strongway or Dake to Build Up Your Own Pump (DIY).
  • Drip Technology Integrated - Driptech System Allows Oil to Drip Down Onto Parchment Paper Below, Preserving the Terpenes.  Simply Tilt the Machine Forward.
  • Great Insulation Performance - Heating up Quickly to Reach Pre-set Temperature in Minutes; Protects the Hydraulics from Overheating.
  • 3x5" Portable Small Heat Press - Easy to Move, and Perfect for Industrial or Personal Use in A Small Apartment, 3x5" Plates Are Common Size and Well Suited with 3.5g - 28g Batches.  Fits Easily on 2x2' Work Table.
  • 4 Magnets and 4 Feet Pad - Two Magnets Installed on the Frame, Other Two Magnets Included in the Package; 4 Pieces of Feet Pad Included in the Package to Prevent Scratches on the Working Table.

Pump Recommendations

  • Dabpress 10-Ton Hydraulic Hand Pump with Gauge | dp-cp590g
  • Build Your Own Hydraulic Pump | Read Here
  • Build the Automatic Rosin Press with the Hydraulic+Pneumatic Foot Pump | Watch Here
  • Hydraulic Hand Pump Recommended Based on Location | Read Here 
  • How To Build Your Own Pump with Gauge | Video(1)  Video(2)
    Specifications:
    • Temperature Range: 0-399F
    • Power: 500 Watts
    • Voltage: 110/220 Volts
    • Total Weight: 32.1 lbs
    • Package Dimension: 20.4" x 13.3" x 12.9"
    • Frame Dimension: (H) 40cm x (W) 23cm x (D) 21.5cm
    • PID Temp Controller Box Dimension: (H) 21.5cm x (W) 15cm x (D) 8.3cm
    • Pressing Area: 3" x 5"
    • Dabpress Rosin Heat Press - Size Comparison
      Puck Maker Recommended:

      • Bottle Tech Pre Press Mold | dp-pm3015r | 3.5-7g Flower Only
      • Hammer Pollen Press | dp-pm30s | 3.5-7g Hash, Kief, and Flower
      • Large Cylinder PrePess Mold | dp-pm40r | 7-12g Flower Recommended
      • 2x4" Pre Press Mold | dp-pm4007s | 7-12g Hash & Flower
      • PrePress Collection
      Packing List:
      • 1 x Portable Driptech Heat Press 
      • 1 x Instruction Manual
      • 1 x Non-stick Silicone Mat
        Attentions:

        • 110V Version Is In Fahrenheit, 220V Version Is In Celsius
        • One Person Operation
        • Keep It out of Reach of Children
        • No Pump Included 
        • Please Attach The Included Fitting Onto End Of Hydraulic Hose To Ensure Proper Function Of Quick Couplers If Not Paired To Dabpress Brand Pump.
        • If Pairing to BVA Hydraulics Hand Pump, Be Sure To Order All Necessary Parts To Build It Up (DIY)

           

          Customer Reviews

          Based on 48 reviews
          92%
          (44)
          4%
          (2)
          2%
          (1)
          0%
          (0)
          2%
          (1)
          P
          P.T.
          Design

          Well designed and built. Pump hand could be designed with more finesse... a little loose. Otherwise work well.

          J
          J.

          Great press in a small form factor, can't ask for more

          I
          I.
          Great setup!

          My first press and in about 40 min. I was making my own rosin. Shipps fast! Doing more pressing over the weekend...will post more pics!

          J
          J.B.
          Brilliant press for the price!

          The press and pump both arrived well packaged and I was able to set it up within 10 minutes. It's dead simple and as close to plug and play as you can get. The build quality and finishing of edges is very good! I'm very happy with my purchase and would recommend anyone to try Dabpress out.

          C
          C.
          Cool

          pity that the press is not level but that's still good.

          We are sorry to bring the inconvenience. It was damaged in the process of shipment, We are trying to offer durable packaging to prevent it from happening again.

          How to Save Your Money?

          1, Please buy our bundled products - Learn more
          2, Please read our news about promotional products - Learn more
          3, If the total order is less than $60, buy it off our Amazon Online Store - Check the link on the detail page.

          Be Noted, Please!

          • Bundle order discount and our promotion code cannot be used at the same time.
          • To recommend Amazon prime member ( Located in the USA ) for saving on shipping charges to buy off our Amazon online store.

          Our Policies

          QUESTIONS & ANSWERS

          Ask a Question
          • Can I just use an air compressor instead?


            Thanks for reaching out. Since it attaches 10-ton hydraulic cylinder, so it can't be powered with the air compressor. If you mean the foot pump with the air compressor, it is no issue.

          • what is the power wattage per plate?

            250 watts per heating rods, 500 watts in total. It reaches setting temp about 4 mins. Thank you!

          • When are you going to start getting some of these presses back in stock? Half of your inventory has been gone for a while. The European plug model doesn't help.

            10-Ton hydraulic cylinder rosin press is available now. Thank you!

          • How do you use this to make wax ? Are there complete instructions on how to use this machine

            Thanks for your question! It is a solventless extractor to flower,bubble hash,dry sift etc.

          • I have the dp-bj6t35 and use pre cut 7x10 inch wide parchment paper. This press looks less wide, will 7 inch wide parchment fit? Thanks

            Hello! Thanks for your reaching out right here. I recommend you pre-fold the parchment paper into a tube. When you see the rosin coming out, please tilt the unit forward (driptech). The rosin will drip on the paper under the unit.

          • Can you get this with the 3x7 cage plates?

            Thanks for your question! We can't rebuild it into 3x7" plates. 

          • What would I need to get it to work with the pump linked to in this question? Just got mine and can't find any of the suggested pumps in stock: https://www.prolinemax.com/MH3-Manual-10000-PSI-Air-Hydraulic-Hand-Pump-Pressure-auge-72-Hose-Coupler_p_2712.html

            Dear Michael, Thanks for your reaching out right here. I got the response from Stongway Support. 10-Ton hydraulic pump with a pressure gauge will be available on Mid-January, 2019. Could you please start pressing with stongway 10 ton pump without a gauge? and you can replace it once the pump with gauge is available? Merry Christmas! Best regards, Dabpress Team 

          • I have the Strongway pump that is recommended to buy what PSI on the gauge should it be reading while I am pressing flower?

            It depends on how big is your pucks. Usually, 4k-5k is the normal psi at the end of rosin bags.

          • Is in this product realy no pump included? I cant find a pump on your site seperate.

            Pump Recommended: 

            To North America Customer -  Hydraulic Pump with Gauge and Hose - 10-Ton Capacity $79.99 |  Buy Strongway Pump with Guage Off Amazon  $79.99 |  Buy Strongway Pump with Guage Off Northen Tool $49.74 | Porta Power Pump w/o Gauge Off eBay.com To Europe Customer - 10 TON Hydraulic Hand Pump Hose & Gauge Porta Power 

            £90.00 | Buy Porta Power Pump with Gauge Off eBay.co.uk €57.81 | HBM 10 Ton Hydraulic Pump with Manometer To Australia Customer - Manual Hydraulic Pump Aluminum Alloy with gauge $101 | Buy The Pump with Gauge Off Aliexpress.com AU $401.99 | Electric Driven Hydraulic Pump 10000 PSI 70Mpa

          Have Questions? Reach out Here

          Customer Reviews

          Based on 48 reviews
          92%
          (44)
          4%
          (2)
          2%
          (1)
          0%
          (0)
          2%
          (1)
          P
          P.T.
          Design

          Well designed and built. Pump hand could be designed with more finesse... a little loose. Otherwise work well.

          J
          J.

          Great press in a small form factor, can't ask for more

          I
          I.
          Great setup!

          My first press and in about 40 min. I was making my own rosin. Shipps fast! Doing more pressing over the weekend...will post more pics!

          J
          J.B.
          Brilliant press for the price!

          The press and pump both arrived well packaged and I was able to set it up within 10 minutes. It's dead simple and as close to plug and play as you can get. The build quality and finishing of edges is very good! I'm very happy with my purchase and would recommend anyone to try Dabpress out.

          C
          C.
          Cool

          pity that the press is not level but that's still good.

          We are sorry to bring the inconvenience. It was damaged in the process of shipment, We are trying to offer durable packaging to prevent it from happening again.
          You have successfully subscribed!